Sale!
2GIG-DW10_-_2GIG_Wireless_Thin_Door_or_Window_Sensor_large

2GIG Wireless Thin Door or Window Sensor

$47.95 $39.95

Categories: ,

Product Description

This contact is meant for use with the 2GIG Alarm System and can be installed on doors, windows and many other objects that open and close. The sensor transmits signals to the control panel when a magnet mounted near the sensor is moved away from or closer to the sensor. The sensor has an external input that accepts N/C dry contact devices. The sensor is also equipped with cover tamper for additional security.

  • Compact size, only 2 in. long
  • Fully supervised
  • Lithium battery with 5 years life
  • Reed sensitivity: 0.625 in. (1.59 cm) minimum gap, 0.85 in. (2.16 cm) typical

Specifications:

Recessed Door Contact (2GIG-DW10-345) 2GIG-DW20R 2GIG-DW40-345
Wireless Signal Range 350 ft., open air, with 2GIG Wireless Alarm Control Panel 350 ft., open air, with 2GIG Wireless Alarm Control Panel 275 ft., open air, with 2GIG Wireless Alarm Control Panel
Code Outputs Alarm; Alarm Restore; External Alarm; External Restore; Tamper; Tamper Restore; Supervisory; Low Battery Alarm; Alarm Restore; External Alarm; External Restore; Tamper; Tamper Restore; Supervisory; Low Battery Alarm; Alarm Restore; Local Bypass Enabled; Local Bypass Disabled; Tamper; Tamper Restore; Supervisory; Low Battery
Transmitter Frequency 345.000 MHz (crystal controlled) 345.000 MHz (crystal controlled) 345.000 MHz (crystal controlled)
Transmitter Frequency Tolerance ± 15 kHz ± 15 kHz ± 15 kHz
Transmitter Bandwidth 24kHz 24kHz 24kHz
Modulation Type Amplitude Shift Keying-On/Off Keying (ASK-OOK) Amplitude Shift Keying-On/Off Keying (ASK-OOK) Amplitude Shift Keying-On/Off Keying (ASK-OOK)
Unique ID Codes Over one (1) million different code combinations Over one (1) million different code combinations Over one (1) million different code combinations
Supervisory Interval 70 minutes 70 minutes 70 minutes
Peak Field Strength Typical 36,000 uV/m at 3m Typical 36,000 uV/m at 3m Typical 36,000 uV/m at 3m
External Input Sampling Current 20 uA 20 uA 20 uA
External Input Accepts N/C dry contact devices Accepts N/C dry contact devices Accepts N/C dry contact devices
Reed Switch Magnetic Sensitivity 10 to 20 amp turns 10 to 20 amp turns 10 to 20 amp turns
Reed Sensitivity 0.625 in. (1.59 cm) minimum gap, 0.85 in. (2.16 cm) typical 0.625 in. (1.59 cm) minimum gap, 0.85 in. (2.16 cm) typical 0.625 in. (1.59 cm) minimum gap, 0.85 in. (2.16 cm) typical
Magnet Type Rare earth – ^^ Rare earth – ^^ Rare earth – ^^
Magnet Dimensions (LxWxH) 1.3 x 0.435 x 0.312 in. (3.3 x 1.1 x 0.79 cm)
Sensor Dimensions (LxWxH) 2.59 X 1.03 X 0.49 in. (6.58 x 2.62 x 1.24 cm) 1.5 x 1.0 x 0.4 in
Weight (including battery & magnet) 1.1 oz. (31.2 g)
Housing Material ABS plastic ABS plastic ABS plastic
Color White White White
Operating Temperature 32 to 120 F (0 to 49 C) 32 to 120 F (0 to 49 C) 32 to 120 F (0 to 49 C)
Relative Humidity 5-95% Non-Condensing 5-95% Non-Condensing 5-95% Non-Condensing
Battery (included) Two (2) Panasonic CR2032, or equivalent Lithium batteries
Regulatory Listing(s) ETL, FCC Part 15, Industry Canada ETL, FCC Part 15, Industry Canada ETL, FCC Part 15, Industry Canada
Warranty* Two (2) years Two (2) years Two (2) years
Included Accessories Two (2) Phillip’s flat-head screws, one (1) two-pin connector with a 12″ flying 2-wire
lead, adhesive strip